next up previous contents
Next: neigh Up: Commands Previous: msg   Contents


   'mshp' <name> 'l'|'s'|'b' ->
      <element-type-nr> <element-attr-nr> ->
This keyword is used to set the mesh parameters for individual surfaces and bodies:

mshp A001 s 8 -1 2.074

sets the lement type to 8 (please see ''Element Types'' for a key to the element numbers) and the attribute to -1 (tr6u) and the mesh density to 2.074 (mesh refinement). For sets of surfaces or bodies the elty command must be used. The attributes are integer values with the following meaning:

root 2018-12-15